Pacific V-RTX 4080 Plus (ASUS ROG & TUF) GPU Water Block
Give your GPU Water Block an Upgrade
We understand your demand for a 4080 GPU, so to keep up with its performance, we’ve also extended the fin structure of the Pacific V-RTX 4080 GPU water block to 45mm x 49.7mm, covering a larger surface area, further enhancing the overall cooling performance. The Pacific V-RTX 4080 GPU water block is not restricted to its inlet and outlet direction, so building your liquid cooling system is free of limitations.
*The image is for reference only
High Water Flow Design
Pacific V-RTX 4080 GPU water block covers all the GPU’s heat sources, ensuring stable and reliable cooling performance even during overclocking. The water block also covers the entire PCB, so no components are exposed, limiting the possible damage while handling the GPU.
*The image is for reference only
High Quality Materials
Pacific V-RTX 4090/4080 Plus series (ASUS ROG & TUF) has a copper base with a mirror-finished anti-corrosive nickel plating and an aluminum backplate. The copper base allows you to spread out the thermal compound quickly while providing exceptional heat transfer and keeping the water block looking as good as new. The aluminum backplate can cover the entire GPU from the back, preventing the PCB board from being twisted or bent.
Stunning LED Lighting Effects
It features 12 addressable LEDs with 16.8 million RGB colors, allowing the reflection of the liquid in the water block to distribute spectacular RGB lighting effects. The lighting effects can be controlled through our TT RGB PLUS 2.0 software, Neonmaker, and 5V motherboard software such as ASUS, GIGABYTE, MSI, and ASROCK RGB software.
Fully Customizable with TT RGB Plus 2.0
You can control 12 addressable LEDs individually on your Pacific V-RTX 4080 GPU water block with our TT RGB Plus 2.0 software, gaining all access to stunning lighting effects! Pair up your liquid cooling components and create a build with full RGB effects!
TT RGB PLUS
TT RGB PLUS Ekosistemi, Thermaltake'in patentli TT RGB PLUS Yazılımı ile birlikte en gelişmiş ve akıllı ışık sistemidir. TT RGB PLUS Ekosistemi renklerle oynamak, renkleri oyunlara göre senkronize etmek, müzik, CPU sıcaklığı veya kasa fanları, CPU/VGA su blokları, AIO CPU soğutucuları, PSU'lar, LED şeritler ve yan ürünler gibi diğer TT RGB PLUS ürünleri için neredeyse sınırsız olanaklar sağlar. Patentli yazılım, kullanıcılara ışık modları, renkler, hızlar, parlaklıklar, fan hızları ve hatta İOS ve Android cihazlardaki AI ses kontrolü alanlarında değişiklik yapabilmelerini sağlar.
TT RGB PLUS 2.0 Yazılımı
Thermaltake'in TT RGB PLUS patentli yazılımının yeni sürümü, daha fazla aydınlatma efekti ve PC izleme işlevi sağlar.
Dikkat:
TT RGB PLUS 2.0 ve TT RGB PLUS 1.0 birbirinin üzerine yazar; kullanıcılar TT RGB PLUS'ın yalnızca bir sürümünü yükleyebilir.
NeonMaker
The NeonMaker is a new and innovative approach to adjusting the RGB
lighting on the some of our products, allowing users
to customize lighting profiles and orchestrate their own light shows.
Personalize Riing Quad Fans, Riing Trio Fans, Distro Case, Floe DX RGB AIO, and TOUGHRAM RGB with
NeonMaker!
Works with Amazon Alexa
All Thermaltake TT RGB PLUS products support Amazon Alexa Voice Service, allowing you to give voice commands to the Alexa-enabled devices.
Sync with Motherboard RGB Software
Designed to synchronize with ASUS Aura Sync, GIGABYTE RGB Fusion, MSI Mystic Light Sync, and ASRock Polychrome. It supports motherboards with a 5V addressable RGB header, allowing you to control the lights directly from the software mentioned above without installing any extra lighting software or controllers. For more details, please visit ASUS, GIGABYTE, MSI, and ASRock official websites.
-
Aura Addressable Header
ASUS -
Digital Pin Header
GIGABYTE -
JRAINBOW Header
MSI -
Addressable RGB LED Header
ASRock
Category | Caution |
Chassis, ARGB Fan, ARGB AIO |
|
RGB Memory, VGA Waterblock, Distro Plate |
|
Cautions
Thermaltake recommends the following steps to be taken
before using
the
Pacific series radiators and water blocks
- To ensure a clean loop, flush and rinse your radiators and water blocks with distilled water prior to use.
- Do not use tap water or distilled water as your coolant, it may harm your loop and reduce performance.
- It is strongly recommended to use market proven pre-mix coolant, such as Thermaltake Coolant 1000. It offers great performance while protecting the entire liquid loop from corrosion.
- Before storing your water cooling components, please clean, rinse and dry. This will ensure a longer lifespan for your components.
Thermaltake recommends the following steps to be taken after completing your water loop
setup
- It is strongly recommended to use market proven pre-mix coolant, such as Thermaltake Coolant 1000. It offers great performance while preventing the entire cooling system – copper, brass, nickel, aluminum, and steel – from corrosion.
- Fill the reservoir with coolant and cycle the power on and off several times while the pump pushing the coolant into the loop.
- DO NOT let the pump run dry, when there is no liquid entering the pump turn off your power immediately
- Fill the reservoir to the top as it will prevent air from going into the pump
- If necessary tilt the system slightly from side to side to bleed the air out of the loop.
- Place some paper towels under fittings and joining points to test for leaks.
- Run the loop with the fill port open for about 24 hours to completely bleed the air out of the loop.
- Before starting, flush out your system correctly to prevent any coolant or unwanted particles sticking to your tubes, radiators and other cooling components.
- Coolant might fade over time.
P/N | CL-W380-PL00SW-A |
---|---|
Boyutlar | 30.5 H x 162.7 x 220.9 L mm |
Ağırlık | 1300 g |
Arayüz | USB 2.0 connectors (9 Pin) |
Sistem Uyumluluğu | Windows 10 / 11 |
Güç Girişi | 2.5 W |
Uyumluluk | ASUS : STRIX RTX 4080 TUF RTX 4080 |
Malzeme | Copper + Acrylic |
Giriş Gerilimi | 5 V |
Vida Dişi | G ¼” |
User Manual
- Dosya Adı
- Açıklama
- Boyut
- Version
- Release Date