Thermaltake Pacific C240 DDC Hard Tube Water Cooling Kit Thermaltake Pacific C240 DDC Hard Tube Water Cooling Kit Thermaltake Pacific C240 DDC Hard Tube Water Cooling Kit Thermaltake Pacific C240 DDC Hard Tube Water Cooling Kit Thermaltake Pacific C240 DDC Hard Tube Water Cooling Kit Thermaltake Pacific C240 DDC Hard Tube Water Cooling Kit Thermaltake Pacific C240 DDC Hard Tube Water Cooling Kit
Thermaltake Pacific C240 DDC Hard Tube Water Cooling Kit

Thermaltake Pacific C240 DDC Hard Tube Water Cooling Kit

stokta mevcut
P/N
CL-W242-CU12SW-A
299,99 €

Pompa / Hazne, LC1 Combo kit, T1000 soğutucu, bağlantı parçaları, bakır radyatör, sert tüpler ve 5V anakart yazılımı kontrol edilebilir 120mm fanlar ve W4 ARGB su bloğu ve diğer aksesuarlar.

Cautions

Thermaltake recommends the following steps to be taken before using the Pacific series radiators and water blocks

  • To ensure a clean loop, flush and rinse your radiators and water blocks with distilled water prior to use.
  • Do not use tap water or distilled water as your coolant, it may harm your loop and reduce performance.
  • It is strongly recommended to use market proven pre-mix coolant, such as Thermaltake Coolant 1000. It offers great performance while protecting the entire liquid loop from corrosion.
  • Before storing your water cooling components, please clean, rinse and dry. This will ensure a longer lifespan for your components.

Thermaltake recommends the following steps to be taken after completing your water loop setup

  • It is strongly recommended to use market proven pre-mix coolant, such as Thermaltake Coolant 1000. It offers great performance while preventing the entire cooling system – copper, brass, nickel, aluminum, and steel – from corrosion.
  • Fill the reservoir with coolant and cycle the power on and off several times while the pump pushing the coolant into the loop.
  • DO NOT let the pump run dry, when there is no liquid entering the pump turn off your power immediately
  • Fill the reservoir to the top as it will prevent air from going into the pump
  • If necessary tilt the system slightly from side to side to bleed the air out of the loop.
  • Place some paper towels under fittings and joining points to test for leaks.
  • Run the loop with the fill port open for about 24 hours to completely bleed the air out of the loop.
  • Before starting, flush out your system correctly to prevent any coolant or unwanted particles sticking to your tubes, radiators and other cooling components.
  • Coolant might fade over time.
Daha Fazla Bilgi
P/N CL-W242-CU12SW-A
Boyutlar 520 (L) x 200 (W) x 232 (H)
Uyumluluk Intel LGA 2066/2011/1366/1156/1155/1151/1150/775
AMD AM4/FM2/FM1/AM3+/AM3/AM2+/AM2
(CPU Soketi)
Bileşenler Pompa ve Hazne: 86,54 (L) x 62 (W) x 140,1 (H) mm
Bakır Radyatör: 29,5 (H) x 119 (W) x 279 (L) mm
Tüp Boyutu OD : 16mm , ID : 12mm
Fan PWM 500~1500 RPM ,
(ARGB Denetleyici veya 5V MB ARGB Senk.)
Soğutucu T1000 Soğutucu Pure Clear
Kit İçeriği CPU Su Bloğu
- Pacific W4 ARGB İşlemci Su Bloğu x1
Pompa / Rezervuar
- Pacific PR15-DDC Pompa / Rezervuar Combo x1
Bakır Radyatör
- Pacific C240 Radyatör 29,5 (H) x 119 (W) x 399 (L) mm x1
ARGB Fanı
- Pure 12 ARGB Senkron Radyatör Fanı TT Premium Sürüm x3
- ARGB LED Kontrol Cihazı
Bağlantılar
- Pacific C-Pro G14 PETG 16 mm OD Sıkıştırma - Siyah x6
- Pacific G1 / 4 90 Derece Adaptör - Siyah x2Soğutma sıvısı
- Thermaltake T1000 Soğutucu Pure Clear x1
Tüp
- V-Tubler PETG Tüpü 16mm OD 500mm x 8
Aksesuar
- Intel ve AMD Evrensel Sırtlı ve Montaj Seti
- 24pin ATX Köprü Aracı x1
- Thermaltake Termal Yağ Gresi x1
- Silikon uç x1

User Manual

  • Dosya Adı
  • Açıklama
  • Boyut
  • Version
  • Release Date